产品描述
FKM(VITON) O-RING
O-Ring Groove Design Extrusion Limits
Contact Us For Assistance Or SamplesClick Here and contact us today to receive a free quote or if you have any questions regarding sizing.
An o-ring is contained in a gland and forced to flow into the surface imperfections of the glands and any clearance gaps available to it.
An o-ring can perform sealing by means of squeeze under low pressure conditions. The extent of extrusion depends upon the hardness of O-ring, the pressure, and the size of the clearance gap.
O-Ring Size & Dimension Charts
There are two main o-ring sizing types: standard and metric. Standard was developed for use in the United States, while the international community uses -metric sizes. The metric sizes are further broken down by region, notably Europe and Japan.
Learn more about O-Ring sizes using the links below to explore their dimensions in an interactive chart.
• Standard AS-568B
• Japanese Metric O-Rings (JIS)
• European Metric O-Rings (DIN)
Seal & Design has all these sizes and more. We can provide virtually any required size.
We Supply This Standard Oring
| ● AS 568A USA | ● BS 4518 England | ● DIN 3771 Germany | ● SMS 1586 Sweden |
| ● AFNOR 47501 France | ● JIS B2401 Japan | ● JASO F404 Japan | ● ISO 3601 International |
Service Guarantee
• Perfect logistics system and SAP system to provide customers with accurate service guarantee;
• Guaranteed shortest delivery time based on stock.
Fkm (or Fluorocarbon) & Knowns As Viton Recommended For
• FKM (or Fluorocarbon) also known as Viton, a registered trademark of The Chemours Company, works for almost every application.
• It can withstand temperatures from -25-degrees F up to 400-degrees F.
• It has a good resistance to ozone, high temperatures, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics and many organic solvents and chemicals.
Chemical Resistance
Mineral oil and grease, low swelling in ASTM oil No. 1, and IRM 902 and IRM 903 oils
Phosphate esters
Non-flammable hydraulic fuels in the group HFDEngine oils Silicone oil and grease
Mineral/vegetable oil and grease
Aliphatic hydrocarbons (fuel, butane, propane, natural gas)
Aromatic hydrocarbons (benzene, toluene)
Chlorinated hydrocarbons (trichlorethylene and carbon tetrachloride)
Fuels, also fuels with methanol content
Not Compatible
Glycol based brake fluids, Ammonia gas amines, alkalis, Superheated steam, Low molecular organic acids (fomic and acetic acids)
Disclaimer: These are general guidelines only. All materials should be tested in your application.
DESIOR TECHNOLOGY CO.,LTD
BLDG B QINGBANG FOREIGN FACTORY HIGH TECH NORTH 4 RD, NANSHAN DIST,SHENZHEN.CHN
SAF Coolest v1.3.1.2 设置面板 AFISD-ZWNF-AXZWE-ZSZ
无数据提示
Sorry, the current column is being updated, please stay tuned!
You can view other sections or go back Home